Type AKF
With 5 brackets, base open, element length 3.0 m

Type AKF1
Standard element, U-shaped, tilted, corrugated perforated sheet metal, element length 3.4 m, element width 15 cm, edge height 9.5 cm, joint plate 250 mm/1.5 mm/3.5 m long.
The corner area has a curved radius and gives great stability and simultaneously makes vibrating under the element stood on edge easier.
   

        

Type AKF2
Design as for AKF1 but with apertures for vibrating, element length, edge height and joint plates to client specifications.
Element length 3.4 m
    
     
      
Type AKF3
Joint plate guide element with 2 loose metal sheets on edge
The 3.0 m-long joint plate guide element consists of 4 sheet brackets permanently mutually connected by 2 longitudinal steel rods. The loose corrugated profile perforated metal sheets are fastened to the vertical reinforcement. The joint plate is inserted in the joint plate brackets and thus securely held in place.
   
     
              
     

Type AKF4
Two-part edging for joint plate