AS-Vario 100, deliverable in heights from 14 cm to 90 cm. Length of the form strip on roll 4,0 m.

The MSL product AS-Vario 100 is a further development of the cavity system type AS-Vario. The rolls of the form strips are deliverable in heights from 14 cm to 90 cm. There is a perforation approximately every 100 mm. With this design it is possible to form larger recesses up to a height of 90 cm with a grid dimension of 10 cm quickly and without a problem on site.

Almost any design can be produced with this system. By tying wire at the join, the system is easily closed like the original Vario type. Due to quicker mounting we recommend the usage of self-tapping screws. The length of a form strip for a recess in the size of i.e. 40 cm x 40 cm is 170 cm when using a screw connection and 160 cm when tying with wire.

The system AS-Vario 100 is waste-free because remaining pieces can be fi xed at the next form strip by using self-tapping screws. The necessary form strips should be cut with an angle grinder with a thin cutting wheel. Naturally, the form strips can also be trimmed by hand by simple bending at the necessary lateral perforation.

Material: black corrugated steel sheets, profi le approx. 10 x 26 mm, tolerance in height plus/minus 10 mm, length of the form strip on roll 4,0 m, short-term delivery.